Thermostat Helper

1. Press Set Time.
2. Press ▲ and ▼ to adjust the hour. When the hour is set, press Menu (Next) to set the minute.
3. To set the day of the week, press Menu (Next) and use ▲ and ▼ to cycle through days.
4. Press Hold to save and exit when you've finished.

The preset schedule was set for maximum energy efficiency. Based on data from homeowners like you, we've created a 7-day preset schedule and have it programmed in your thermostat:

Your thermostat has separate schedules for Heating and Cooling. The process is identical for setting both.

1. Move the System switch between Heat and Cool schedules.
2. To enter schedule menu, press the Menu, then use ▲ and ▼ to navigate to Schedule. Press Menu (Next) to select.

Start of the period should display in the top left corner. You have four periods (Wake, Leave, Return and Sleep) to set. Temperature setpoint for current period should display in the top right corner.

1. Use ▲ and ▼ to adjust start time, and press Menu (Next) to start adjusting temperature.
2. With the current period set, press Menu (Next) to advance through all periods for all of the days of the week.
3. If you want to go back, press Run (Back) to return to the previous setting.
4. Once all days have been programmed, the thermostat will display End. Press Hold to return to home screen

You can temporarily override your thermostat’s schedule by pressing ▲ and ▼ to adjust the temperature to your liking.

The override will last until next scheduled period begins, with a minimum period of two hours. End time of the override will be displayed in the top-left corner.

Before you begin, make sure make sure your system is set to heating or cooling.

1. Press Hold to put the current temperature on hold. Hold label should show up in the top right corner.
2. Press ▲ and ▼ to set the temperature to your liking.

Your room will stay at this temperature until you resume your schedule by pressing the Run button and Hold label disappears

Who's a scheduling pro? You are!

1. Press Set Time.
2. Press ▲ and ▼ to adjust the hour. When the hour is set, press Menu (Next) to set the minute.
3. To set the day of the week, press Menu (Next) and use ▲ and ▼ to cycle through days.
4. Press Hold to save and exit when you've finished.

The preset schedule was set for maximum energy efficiency. Based on data from homeowners like you, we've created a 7-day preset schedule and have it programmed in your thermostat:

Your thermostat has separate schedules for Heating and Cooling. The process is identical for setting both.

1. Move the System switch between Heat and Cool schedules.
2. To enter schedule menu, press the Menu, then use ▲ and ▼ to navigate to Schedule. Press Menu (Next) to select.

Start of the period should display in the top left corner. You have four periods (Wake, Leave, Return and Sleep) to set. Temperature setpoint for current period should display in the top right corner.

1. Use ▲ and ▼ to adjust start time, and press Menu (Next) to start adjusting temperature.
2. With the current period set, press Menu (Next) to advance through all periods for all of the days of the week.
3. If you want to go back, press Run (Back) to return to the previous setting.
4. Once all days have been programmed, the thermostat will display End. Press Hold to return to home screen

You can temporarily override your thermostat’s schedule by pressing ▲ and ▼ to adjust the temperature to your liking.

The override will last until next scheduled period begins, with a minimum period of two hours. End time of the override will be displayed in the top-left corner.

Before you begin, make sure make sure your system is set to heating or cooling.

1. Press Hold to put the current temperature on hold. Hold label should show up in the top right corner.
2. Press ▲ and ▼ to set the temperature to your liking.

Your room will stay at this temperature until you resume your schedule by pressing the Run button and Hold label disappears

Who's a scheduling pro? You are!

1. Press Menu, and the time icon in the pop-up menu will be flashing. Press the Menu (Next) to select.
2. Press ▲ and ▼ to adjust the hour. When the hour is set, press Menu (Next) to set the minute.
3. When time is set, press Menu (Next) to start setting the day of the week. Use ▲ and ▼ to cycle through days.
4. Press Hold/Run to exit when you've finished.

The preset schedule was set for maximum energy efficiency. Based on data from homeowners like you, we've created a 7-day preset schedule and have it programmed in your thermostat:

Your thermostat has separate schedules for Heating and Cooling. The process is identical for setting both.

1. Press the System button to switch between Heat and Cool schedules.
2. To enter schedule menu, press the Menu, then use ▲ and ▼ to navigate to Schedule. Press Menu (Next) to select.

Start of the period should display in the top left corner. You have four periods (Wake, Leave, Return and Sleep) to set. Temperature setpoint for current period should display in the top right corner.

1. Use ▲ and ▼ to adjust start time, and press Menu (Next) to start adjusting temperature.
2. With the current period set, press Menu (Next) to advance through all periods for all of the days of the week.
3. If you want to go back, press Fan (Back) to return to the previous setting.
4. Once all days have been programmed, the thermostat will display End. Press Hold/Run to return to home screen

You can temporarily override your thermostat’s schedule by pressing ▲ and ▼ to adjust the temperature to your liking.

The override will last until next scheduled period begins, with a minimum period of two hours. End time of the override will be displayed in the top-left corner.

Before you begin, make sure make sure your system is set to heating or cooling.

1. Press Hold/Run to put the current temperature on hold. Hold label should show up in the top right corner.
2. Press ▲ and ▼ to set the temperature to your liking.

Your room will stay at this temperature until you resume your schedule by pressing the Hold/Run button and Hold label disappears.

Who's a scheduling pro? You are!

1. Press Menu, and the time icon in the pop-up menu will be flashing. Press the Menu (Next) to select.
2. Press ▲ and ▼ to adjust the hour. When the hour is set, press Menu (Next) to set the minute.
3. When time is set, press Menu (Next) to start setting the day of the week. Use ▲ and ▼ to cycle through days.
4. Press Hold/Run to exit when you've finished.

The preset schedule was set for maximum energy efficiency. Based on data from homeowners like you, we've created a 7-day preset schedule and have it programmed in your thermostat:

Your thermostat has separate schedules for Heating and Cooling. The process is identical for setting both.

1. Press the System button to switch between Heat and Cool schedules.
2. To enter schedule menu, press the Menu, then use ▲ and ▼ to navigate to Schedule. Press Menu (Next) to select.

Start of the period should display in the top left corner. You have four periods (Wake, Leave, Return and Sleep) to set. Temperature setpoint for current period should display in the top right corner.

1. Use ▲ and ▼ to adjust start time, and press Menu (Next) to start adjusting temperature.
2. With the current period set, press Menu (Next) to advance through all periods for all of the days of the week.
3. If you want to go back, press Fan (Back) to return to the previous setting.
4. Once all days have been programmed, the thermostat will display End. Press Hold/Run to return to home screen

You can temporarily override your thermostat’s schedule by pressing ▲ and ▼ to adjust the temperature to your liking.

The override will last until next scheduled period begins, with a minimum period of two hours. End time of the override will be displayed in the top-left corner.

Before you begin, make sure make sure your system is set to heating or cooling.

1. Press Hold/Run to put the current temperature on hold. Hold label should show up in the top right corner.
2. Press ▲ and ▼ to set the temperature to your liking.

Your room will stay at this temperature until you resume your schedule by pressing the Hold/Run button and Hold label disappears.

Who's a scheduling pro? You are!